Print this page
RU EN

"LIVEN-TS" SOLID WETTING AGENT (Cleaning)

1. Product name:

"LIVEN-TS" SOLID WETTING AGENT (Cleaning)

2. Purpose of product:

"Liven-TS" solid wetting agent (cartridge) is designed for the final cleaning of oil stains after the accidents on the highways, etc.

"Liven-TS" solution may also be used to clean equipment from soot, oil and other contaminants. . It is used for operation in the manual fire-hose barrel of combined type with the cartridge compartment, in hose tubes.

"Live-TS" is perfectly suitable for cleaning the pavement after an oil leak or oil and lubricants (POL) in road accidents. These substances create a dangerous oily film on the highways that difficult to remove. After removal of the sorbent impregnated with oil and petroleum products, its recommended to wash the pavement with "Liven-TS" wetting agent, so the surface can easily return to its original state.

3. Description:

а) Cartridge external view -  solid wax of cylinder shape‚ without specific odor

б) Composition - mixture of polyethylene glycol and synthetic surface-active substances.

4.  Physicochemical properties:

Cartridge sizes:                -  diameter

                                         -  height

50 + 1  mm

250 + 3 mm

Weight

Not less than 580gr.

Water surface tension reduction grade

40% at minimum

рН 

6,0 - 10,0 (0,5% solution)

Wetting ability index (0,5% solution, s, not more than)

9

Absolute solubility

Not less than 2500 L

Softening temperature

Over +35°С

Thawing temperature

Over +60°С

Water solubility

100%

5.  Operational and technical abilities:

Recommended storage temperature

From -20 °С  to  +40°С

Shelf life

Guaranteed - 12 months in original package.

Storageability - not less than 10 years in original package

Corrosive behavior

Product doesn't cause a corrosion

6. Figure:

LIVEN-TS SOLID WETTING AGENT (Cleaning) 

7. Health care and environmental protection:

From the aspects of health and environment cartridge is harmless and does not contain fluoric hydrocarbones.

By the grade of impact to organism its conforms to the Class 3 of hazard (GOST 12.1.007).

Extinguishing solutions of wetting agent are harmless and do not have local irritating skin-resorptive and sensitizing effects.

8.  Application:

Wetting agent solution is produced by the way of washing cartridge with water flow that runs through mixer tube. Adjustment of the consumption of extinguishing solution, defined by the type of the fire-hose barrel.

Maximum efficiency of the agent is achieved in case of full water jet with medium and maximum water flow.

Because of environmental concerns, it's prohibited to use the cartridge for a direct wash-off of petroleum products without prior removal of leakage through the sorbent. A solution of wetting agent is used only after removing the impregnated sorbent from surface.

9. Storage:

Cartridges of "Liven-TS" solid wetting agent should be stored in the sealed original carton boxes, in warehouse with waterproof fool. Each cartridge is packed into airtight polyethylene film, which has to be removed before use. Unpacked cartridge once installed into the dry tube of the fire-hose barrel is ready to immediate use. 

10. First Aid:

IN CASE OF SKIN CONTACT - rinse with clean water in order to prevent possible irritation.

IN CASE OF EYE CONTACT - rinse with clean water for at least 15 minutes, ask for medical assistance if necessary.

IN CASE IF TAKEN INTO - give to the injured to drink 2 glasses of water and do not try to cause vomiting. Ask for medical assistance if necessary.

© 2010 ООО Ливень
Поддержка. Разработка сайтов в Megagroup.